ES1D2X16SSC2 Huawei 16-Port 10GBASE-X Interface Card,SC,SFP+ Connector type

ES1D2X16SSC2 Huawei 16-Port 10GBASE-X Interface Card,SC,SFP+ Connector type

The model ES1D2X16SSC2 typically refers to a specific type of network switch or module, often associated with Huawei or similar networking equipment. However, detailed information about this specific model may not be readily available.

General Features (if applicable)

• Form Factor: Usually part of a modular switch or router, designed for high-performance networking.
• Port Density: Likely to include multiple ports for Ethernet connectivity, possibly supporting various speeds (1G, 10G).
• Layer Support: May support Layer 2 and Layer 3 features, catering to both switching and routing needs.
• Management Features: Often includes advanced management capabilities for network monitoring and configuration.

Use Cases

• Data Center Networking: Commonly used in data centers for efficient traffic management.
• Enterprise Networking: Suitable for enterprise environments requiring reliable and scalable networking solutions.

 

ES1D2X16SSC2 Overview

Huawei 16-Port 10GBASE-X Interface Card(SC,SFP+) ES1D2X16SSC2

 

Introduction

The ES1D2X16SSC2 can be installed in:

• Slots 01 to 03 in an S7703 or S7703 PoE chassis.
• Slots 01 to 06 in an S7706 or S7706 PoE chassis.
• Slots 01 to 12 in an S7712 chassis.

 

 Functions of the ES1D2X16SSC2

Function	Description
Basic function	Provides sixteen 10GE optical ports for data transmission and switching.
Distributed forwarding	Performs concurrent data forwarding using a distributed data plane.
Software feature	Service port clustering
Hot swapping	The ES1D2X16SSC2 is hot swappable.

If service ports on the ES1D2X16SSC2 need to be used to set up a CSS, the card can only be installed in the S7712 or S7706 chassis and must use 10G optical modules and 10G cables.

 

 

 

Indicators on the ES1D2X16SSC2 panel

 

Number	Indicator	Color	Description
1	ACT indicator of a lower optical port	Yellow	Blinking: The port is transmitting and receiving data.
2	ACT indicator of an upper optical port
3	LINK indicator of a lower optical port	Green	Steady on: A link has been established on the port.
4	LINK indicator of an upper optical port
5	RUN/ALM: running status indicator	Green	Steady on: The card has been powered on, but the software is not running. Slow blinking: The card software is running properly. Fast blinking: The card software is starting.
		Red	Steady on: The card has failed and the fault requires manual intervention.
		Yellow	Steady on: The card is powered off. (For example, the card has been forcibly powered off using the power off command or is about to start.)

 

Optical port attributes (10GE optical module, high-speed cable or SFP+ optical cable)

Attribute	Description
Connector type	SFP+
Optical port attributes	Depend on the SFP+ - SFP+ high-speed cable (1 m, 3 m, 5 m, 10 m), QSFP+ - 4*SFP+ high-speed cable (1 m, 3 m, 5 m), SFP+ optical module, or SFP+ optical cable used. For the optical modules supported by the ES1D2X16SSC2 and their attributes, see 10GE SFP+ Optical Modules, 10GE-CWDM SFP+ Optical Modules and 10GE-DWDM SFP+ Optical Modules.
Standards compliance	IEEE 802.3ae
Frame format	Ethernet_II, Ethernet_SAP, Ethernet_SNAP
Network protocol	IP

 

Specifications of the ES1D2X16SSC2

Item	Description
Physical specifications	Dimensions (H x W x D): 35.1 mm x 394.7 mm x 426.8 mm (1.38 in. x 15.54 in. x 16.80 in.) Weight: 2.80 kg (6.17 lb) Maximum power consumption: 131 W
Environment specifications	Operating temperature: 0°C to 45°C (32°F to 113°F) Operating relative humidity: 5% RH to 95% RH (noncondensing) Storage temperature: -40°C to +70°C (-40°F to +158°F) Storage relative humidity: 5% RH to 95% RH (noncondensing)